Close this search box.

Battery Discharger for LiPO Drone Batteries – FD1 / SD3 / SD3+ / Gannet / SharkX / Cuta / Poseidon (XT60 Connector)

$79.00 incl GST

This LIPO battery discharger supports the discharge of Lipo batteries  (3S to 6S) by connecting via XT60 connector on the battery and outputting via Type-C port. Which then provides the ability to power devices at the same time including laptops and mobile phones with upto 60W of output power.

Available on back-order

Discharge your LiPO Drone Battery to safe battery storage levels while not in use.

Simply Plug in your Battery, set the desired final storage voltage of the battery on the discharger – and the discharger will do the rest!

Supports Fishing Drone Models for:

  • Splashdrone 3, Splashdrone 3+
  • Swellpro FD1 (later model FD1 batteries please note below*)
  • Cuta Copter Trident* and Boss*
  • Gannet Pro and Pro +*
  • Gannet II and Gannet II Max*
  • Poseidon II/Black*
  • Rippton Shark X*


*PLEASE NOTE: This discharger is made to fit the smaller XT60 Style Battery connector.  An additional adapter cable can be purchased to enable this discharger to connect to the NEW LARGER XT90 Style battery. For example Shark X, Cuta Copter, Gannet Pro+ and Max, New model Swellpro FD1, Poseidon – all use the larger XT90 Battery Connector  HERE IS A LINK TO THE ADAPTER CABLE

Also allows you to charge your Mobile phone, Laptop or other devices via USB Type-C connector at the same time!

Product Name Discharger
Power Input Voltage Range 3S LIPO Batteries – Upto 6S LIPO Batteries
Power Input Connector XT60-Male
Fast Charging Output interface USB-C Port
Supported Fast Charging Protocol PD3.0/QC4+/PPS/AFC/FCP/SCP/PE2.0/SFCP
Fast Charging Power 60W Max(3S,Max 30W;4S,Max 40W;6S,Max 60W)
Dimension(Main Body) 78*45*22mm
Net Weight 56g
Error Notification (flashing screen and beeping) Er1 Short circuit, power off
Er2 Overheated, power off
Er3 Overheated
Er4 Overvoltage, power off (>26V)
Er5 Low power voltage,power off(<10.5V)
Er6 Alarm for low voltage of cell (3.80V by default, support customization)
Er7 Alarm for 0.3V voltage difference of cell
Low voltage alarm (flashing screen and beeping) 3S Lipo ≤11.1V
4S Lipo ≤14.8V
6S Lipo ≤22.2V




knockout 87


Package Includes:

  • Discharging Device
  • Balance Adapter Cable (additional balance adapter cable if required)


FDQ EN 7 1



– Please ensure you ONLY use the correct & original charger to charge this battery

– Please NEVER leave your battery unattended while it is charging, as there could be a fire risk.  Do not leave charging overnight.

– Please ensure you charge your battery in an open & well ventilated area that is away from any flammable material.  It is also recommended that you charge & store your battery in a fire-proof bag or container (purchased separately).

– Always make sure you have the correct charging settings for the battery you are charging

– Never use or charge a battery that has become swollen OR has any physical damage. Please dispose of immediately.




**It is recommended that you also read this article on LiPo and LiHV Batteries and their care and maintenance. the link is HERE 

**Also please read the Returns and Warranty Information regarding batteries HERE

Weight 1 kg


There are no reviews yet

Be the first to review “Battery Discharger for LiPO Drone Batteries – FD1 / SD3 / SD3+ / Gannet / SharkX / Cuta / Poseidon (XT60 Connector)”

Your email address will not be published. Required fields are marked *

Join Our Newsletter

A direct line to your inbox with drone fishing news, tips and product reviews.