Swellpro FD1 Replacement Water Resistant Barometric Membrane

Overview: The water resistant barometric membrane is SwellPro’s featured technology. It allows air to pass through the internal chamber of the aircraft to ensure the barometer’s proper functioning yet keeps the water from getting in to ensure the Fisherman’s water resistant design.

Important:

You should pay special attention to the proper use of barometric membrane during your operation.
• Rinse the barometric membrane thoroughly with freshwater every time after flying.
• If the aircraft is not flying stably during hovering, or the aircraft is not flying normally during ascend or descend, the barometric membrane might be damage. Please take off the top barometric membrane cover and replace the barometric membrane.

How to replace the barometric membrane:

1. Use a sharp tool (such as a knife) to remove the adhesive, then take off the top cover.
2. Peel off the old barometric membrane. Clean the surface barometric vent and make sure there is no residue on the surface.
3. Remove the 3M paper from the barometric membrane and press it firmly on the barometric vent to ensure a tight seal.
4. Attach the adhesive to the top cover and press it down over the barometric membrane.

In the Box: Membrane and GPS Module Adhesive x 1

Compatibility: Fisherman FD1