Cuta Copta Trident 5K 5200mAh Drone Battery (XT90 Connector)

High Performance 5200mAh LiPO Battery for the Cuta Copter Trident 5K

This high performance LIPO battery offers ultra-high output with 90C constant discharge and 180C bursts for that extra edge over other battery packs when you need reliability and lifting power.

Excellent value for money for a high end, high performance LIPO. battery that perfectly suits Cota Copter Trident and Boss Drones.

Advantages over traditional Lipo batteries;
• Excellent power density meaning high capacity and smaller diameter.
• Less Voltage sag during high rate discharge, giving more power under load.
• Greater thermal control, which translates into a cooler battery back during discharge.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.

Capacity: 5200 mAh
Voltage: 22.2V / 6-Cell / 6S1P
Discharge Rate: 90C Continual / 180C Burst
Weight: 792g (including wire, plug & case)
Dimensions: 155x49x52mm
Output Connector: XT90
Balance Connector: JST / XH

_____________________________

IMPORTANT:

– Please ensure you ONLY use the correct & original charger to charge this battery

– Please NEVER leave your battery unattended while it is charging, as there could be a fire risk.  Do not leave charging overnight.

– Please ensure you charge your battery in an open & well ventilated area that is away from any flammable material.  It is also recommended that you charge & store your battery in a fire-proof bag or container (purchased separately).

– Always make sure you have the correct charging settings for the battery you are charging

– Never use or charge a battery that has become swollen OR has any physical damage. Please dispose of immediately.

CAUTION:

WARNING ⚠️ IF BATTERIES ARE NOT PLUGGED IN CORRECTLY IT COULD CAUSE DAMAGE

**It is recommended that you also read this article on LiPo and LiHV Batteries and their care and maintenance. the link is HERE 

**Also please read the Returns and Warranty Information regarding batteries HERE